Real-time subtitles add AI subtitles to a live stream, translate them into the languages you choose, and can also read the translations aloud as extra audio tracks. The feature is easy to use but requires contacting support before the first use. Just ask us to enable the feature and we will!

If you want to see a demo, you can see one here .

×

Language settings

1. Make sure that you have Real-time Subtitles compatible live channel selected. If support has enabled Real-time subtitles but you can’t see Real-time subtitles in the menu under the Live section, you most probably don’t have the Real-time subtitles compatible live channel selected. You pick the channel under Live → External encoder, and the right one usually has real time subtitles in its name.

×

2. When you have the right live channel selected, you can find Real-time subtitles under the Live section of the Event Admin menu. Click it to open the settings. If the page tells you the chosen live channel is not real-time subtitles capable, go back to External encoder and pick another channel, or contact support to have one enabled.

×

3. Turn on Show subtitles at the top of the page. This is what makes the subtitles appear in the player on your event page. It is an event setting, so click Save in the top bar afterwards. It is the same setting as Enable subtitles under Edit → Subtitles and transcripts, so you only need to turn it on in one of the two places.

4. Choose the Source language. This is the language that is spoken in the stream. If more than one language is spoken, for example a panel discussion that switches between Finnish and English, choose Multilingual (auto-detect) instead of a single language.

When you choose Multilingual (auto-detect), an Expected languages field appears. It is optional: leave it empty and any language is detected. Listing the languages you expect to hear in the stream improves the accuracy of the transcription, so fill it in when you know what will be spoken. If you list a language the automatic detection does not support, it is skipped and the page tells you which one.

5. Choose the Translation engine. This is the AI engine that translates the subtitles. If one of your chosen languages is not supported by the engine you picked, a supported engine is used automatically for that language, and the language row tells you which engine it fell back to. One of the engines is marked (recommended for voice-over). Choose that one if you are going to use AI voice-over.

6. Pick your translations. Search for a language or click it in the grid below Select translations; use Show all languages to see the full list instead of the suggested ones. Everything you pick appears in the Selected translations list, where you can remove a language with the ✕. The source language is always shown to viewers as subtitles, which is why it is not in the translation list. If you pick no translations at all, viewers just get subtitles in the spoken language.

7. Optionally turn on Voice-over for individual languages in the Selected translations list. Voice-over produces a spoken AI translation as an extra audio track on the stream, not a subtitle track. See AI voice-over below.

8. Check the panel next to the settings. It lists what you have selected: the source language, the number of translations, how many languages have voice-over, and the estimated duration taken from your event settings. On accounts that show pricing it is titled Estimated cost and includes a price estimate; on other accounts it is titled Summary. Any price shown is an estimate based on the event duration in the event settings, and the final billing is based on the actual subtitle generation time.

9. Click Save Language Settings. If a language you picked turns out not to be supported, the settings are still saved and a notification tells you which languages were skipped.

Turning the service on and off

1. You turn on the service before the event by clicking Start subtitled stream button. Seeing this button requires having the Real-time subtitles capable live channel selected.

×

2. Turn the service on 5–10 minutes before you need it. Starting it can take up to 5 minutes depending on the load on the servers, and until the service is running, viewers see nothing on the event page at all, neither the subtitles nor the stream itself. While it starts, the button reads Initializing subtitled stream.

×

3. Once the Real-time Subtitles service is up and running, you will see a notification and there will be Stop subtitled stream text in the button.

×

4. When the Real-time Subtitles service is up and running, you can start streaming to the live channel from you encoder with the RTMPS URL and stream key used by the Real-time Subtitles compatible live channel. You can see Bitrate in showing when Videosync is receiving your stream, but you should be aware that the delay with Real-time Subtitles capable live channel is 60 seconds.

×

5. Ending the stream. When you are ready to end the stream, it is recommended to set the event to End live state first, then click Stop subtitled stream and after that stop the encoder.

Features

AI voice-over

Voice-over turns a translation into speech. For every language you tick Voice-over for, the stream gets an additional audio track in that language, on top of the original audio. Viewers switch between them from the audio track selector in the player, the same way they would switch between interpreted feeds. Voice-over does not replace the subtitles. The subtitle tracks stay as they are, and a viewer can listen in one language and read in another.

Voice-over is not available for every language. The page checks the current availability for each language you have selected, and greys out the tick box with the note Voice-over is not available for this language where it cannot be produced. If the check cannot be completed for a language, voice-over is left off for that language and a notification after saving asks you to save again. Nothing unverified is turned on, so you are not billed for a voice-over that would not have been produced.

Choose the translation engine marked (recommended for voice-over) when you use this feature. The other engines translate fine, but the recommended one is the engine the voice-over is designed to work with.

A language with voice-over costs the same as one more translation language, so a language you both translate and voice over counts twice in the estimate.

Default audio track

As soon as one language has voice-over, the stream has more than one audio track, and a Default audio track setting appears on the page. It decides which track the player starts with:

• Automatic lets the player choose. In browsers that means the viewer’s own language. A viewer whose browser is set to a language you produced a voice-over for hears that voice-over, and everyone else hears the original audio.
• The option marked (source), which is your source language, starts everyone on the original audio, whatever their browser language is. This is pre-selected for you when you turn on the first voice-over.
• Any voice-over language starts everyone on that AI voice-over.

Keywords

Names and acronyms the AI would otherwise hear wrong (is the CEO Kathy or Kati?) are managed in the Keyword bank section on this page. The bank is account-wide and shared with automatic transcripts. See Keyword bank for how to set it up.

FAQ

/* BLACK BACKGROUND FOR THE SUBTITLES */
.bmpui-ui-uicontainer .bmpui-ui-subtitle-overlay {
    display: inline !important;
}
.bmpui-ui-subtitle-label {
  display: inline !important; /* Ensures it doesn’t force full width */
}
.bmpui-ui-subtitle-label span {
  display: inline !important;
  background-color: rgba(0, 0, 0, .75) !important;
  padding: 7px 5px 2px 7px !important;
  line-height: 1.6 !important;
  font-family: Arial, Helvetica, sans-serif !important;
}